Last updated: October 18, 2026

SMD is the surface-mount package of a component, while SMT is the assembly process that places it on the board; the two are often confused. THT parts go through holes and cannot go through reflow. Decide SMD or THT first, then check package size and the spec table.

ItemSMDTHT
MountingSurface-mount package, placed on the board by SMTLeads go through holes in the board
SolderingReflowNot suited to reflow; wave or hand soldering
Typical fitAutomated pick-and-place volumeSmall runs, hand assembly or stronger mechanical hold
SMD vs THT at a glance. SMD is the part; SMT is the assembly process.

Get the terms straight: SMD, SMT, SMA, SMC

SMD names the component itself, SMT names the assembly process, and SMA, SMC, SMP and SME are related terms that often get mixed up. One article on our blog sorts them out one by one, with a size chart, a simple SMT flow and a diagram of how the terms relate; read it first so the rest of the spec sheet makes sense.

OPTO PLUS LED SMD 7-segment displays with gold pads, from the smallest to the largest
SMD 7-segment displays, smallest to largest.

Through-hole (THT): when it is still the right choice

THT parts have leads that go through holes in the board. THT displays cannot go through a reflow oven, so they are wave soldered or hand soldered; the article covers wave soldering conditions, hand soldering and rework, lead bending and storage, and a THT vs SMD comparison. For small runs, hand assembly or stronger mechanical hold, THT is still common.

THT OPD-S5620LE-GW vs SMD OPS-S5620SB-GW: 8.00 vs 3.85 mm height, 239.4 vs 262.5 mm² footprint
Values from each part’s datasheet.
Wave soldering (1 pass) vs reflow (max 2 passes): what 260 °C means
Check the soldering profile in the datasheet before choosing a process.

Need an SMD or THT part for a specific footprint? Request a quote with the size, color and assembly process, and the OPTO PLUS LED engineering team will suggest a matching part.

PLCC and SMD LEDs: reading the part name and size

PLCC-2 has 2 leads and PLCC-4 has 4 leads; 3528 means a 3.5 x 2.8 mm package, and you also choose between top view and side view. If you need full color, read the RGB SMD LED package and driver IC comparison.

PLCC SMD LEDs, side view
PLCC SMD LEDs: read the size from the part name and the datasheet.

Spec tables and application notes: what to check before ordering

Start with the four things to check first, then read forward current, forward voltage, brightness (mcd) with viewing angle, wavelength, lens and package (SMD or THT first); the article ends with a checklist. The application notes collect handling advice for each product family.

Find a part and take the next step

Our advice: confirm your assembly method (reflow or wave) first, go back to the product list to pick a package, and send your requirements with the quote request.

Related guides: 7-Segment Display Guide · Custom LED Display Process · LED vs LCD Display Guide

FAQ

What is the difference between SMD and SMT?

SMD (Surface Mount Device) is the component itself, SMT (Surface Mount Technology) is the assembly process that places it on the board. In short, SMD is the part and SMT is the method. SMA, SMC and similar terms are related; the OPTO PLUS LED SMD article explains each with a diagram.

Can THT displays go through a reflow oven?

No. Through-hole (THT) displays are not suited to reflow; they are wave soldered or hand soldered under the conditions in the application notes. If your line only has reflow, choose an SMD part, or ask OPTO PLUS LED whether a matching part number exists.

Should I choose SMD or THT?

Start with how you assemble and how many you build: automated pick-and-place volume usually points to SMD, while small runs, hand assembly or stronger mechanical hold may favor THT. Then check forward current, brightness and viewing angle against the spec table, and make sure the package fits the enclosure. If unsure, put your requirements into the quote request and OPTO PLUS LED can help compare.

Reviewed by the OPTO PLUS LED Engineering Department.