LED display design

2020-07-01
OPTO PLUS LED corp. tooling cost for Custom LED display and Customize standard LED display.


 

  • Introduction
Make a brief introduction about OPTO PLUS LED corp. tooling cost range for Custom LED display and Customize standard LED display. For the tight-budget customer, OPTO PLUS provide customize standard LED display to reduce the total cost for customer's need. If you have a similar inquiry, please "Contact US" for engineer support and quoted.


  • OPTO PLUS LED corp. Custom LED display tooling cost
Generally, The Custom LED display tooling cost is about USD 3600-10000. But the actual tooling cost depends on size, circuit complexity, and structure complexity. For the Custom LED display, Minimum Order Quantity is a discussion result between OPTO PLUS LED corp. and customer. please check the "Custom LED display design flow" for detail.

 

  • What is Customize standard LED display? what's its advantage?

Customize standard LED display means that modify any existing Standard type LED display to meet customer's inquiries. Customer can check "Custom LED display design flow" for detail design flow. we will introduce some examples for the reader.

 
 

  • Customize standard LED display example - Change the priory or the emitting color of Standard display

Use Standard 3 digit 7-segment LED display OPS-T3010SE-GW as an example. If you want to change the emitting color of DIG.3 from red to white. (please see the below picture in red rectangle). Customers need to send this inquiry OPTO PLUS LED Corp. to estimate. The tooling fee ( Major for PCB re-layout)  is about 10~20% of fully custom design tooling cost. and The Minimum Order Quantity for this inquiry is 3K~10K/Pcs. if you have a similar inquiry, please "Contact US" for support.
  •  
Customize standard LED display example - Change OPS-T3010SE-GW emitting color


 

  •  Customize standard LED display Example - Change circuit and add pinout for Standard LED display 
Use Standard 3-digit LED 7-segment display OPS-T5632SY-ST-1.5-GW as an example. if you want to change the internal circuit and add a pinout(please see the below picture in red rectangle). Customers need to send this inquiry OPTO PLUS LED Corp. to estimate. The tooling fee ( Major for PCB re-layout)  is about 10~20% of fully custom design tooling cost. and The Minimum Order Quantity for this inquiry is 3K~10K/Pcs. if you have a similar inquiry, please "Contact US" for support.

Customize standard LED display Example - Change  OPS-T5632SY-ST-1.5-GW circuit and add pinout 
 

  • Conclusion 
OPTO PLUS LED co is a professional LED Display manufacturer located in Taiwan. We have 10+ experience in design and manufacture LED 7-segment display, LED Alphanumeric display, and other types of LED display. Please see the "OPTO product application" to find a similar application. if you have any problems. please "Contact US" for more support.
 
Image




Previous Page   |   Back   |   Next Page

Contact us