OPTO PLUS LED Model coding rule

We will briefly explain OPTO PLUS LED model number rules. OPTO PLUS LED model number rules will show these product functions at a glance.

Use OPD-S3010YG-BW as an example for demonstrate model number rules

Use OPD-S3010YG-BW as an example for demonstrate model number rules

[1] represent the outer connection about this product, another example, S=SMD Type, D=Through hole type, L=Lamp ..etc
[2] represent the display type about this product, another example, S=single digit, D=dual digit, T= three-digit …etc
[3] represent the digit hight about this product ,other example,30 = 0.3 inch 100=1 inch …etc
[4] represent the version of reflector about this product ,other example, 2 = Version 2, 3 = Version 3 …etc
[5] represent the LED connection type about this product, another example, odd number= common anode, Even number = common cathode.
[6] represents the emitting color about this product, another example, YG= Yellow Green…etc
[7] represent the face color of reflector about this product, another example, B=Black face, G= Gray face
[8] represents the segment color of reflector about this product, another example, W=White segment, R= red segment.

Summary table of OPTO PLUS LED model coding rule

ItemcodeNote
[1]Outer connection of the productDThrough hole display
SSMD Display
ECustom Design included IC/Resistor …etc
LLamp
[2]digit height280.28 inch
300.3″ inch
400.4″ inch
560.56″ inch
1001″ inch
XX0.XX inch
[3]Display typeSSingle Digit Display
DDual Digit Display
TThree Digit Display
QFour Digit Display
FFive digit Display
VDigit + icon Display
MMatrix Display
RRound shape Display
[4]REF version(Number)Number of version
[5]Common cathode/anodeoddnumberCommon cathode
evennumber Common anode 
ItemCodeNotewavelength (Peak, 20mA)
[6]Emitting color of the displayLA/SASuper bright amber612nm
UPG/SPGSuper bright pure green530nm
LB/SBSuper bright blue470nm
LY/SYSuper bright yellow593nm
SRSuper red655nm
WWhiteX: 0.285, Y: 0.275
YG/SYGSuper bright yellow green573nm
LE/SESuper bright orange-red632nm
LRSuper bright red650nm
LE1Super bright red-orange645nm
UEUltra-bright orange-red627nm
URUltra bright red660nm
[7] REF face colorGGreen face 
RRed face
BBlack face
WWhite face
[8] Display segment colorRRed face
GGreen face
WWhite face

Special remarks for Emitting color

The emitting color expression is a brief-expression about the display product, the most common peak wavelength, or CIE1931 expression show below.
the real emitting color expression should check the datasheet for each product.

ItemCodeNoteWavelength (Peak, 20mA)
LA/SASuper bright amber612nm
UPG/
SPG
Super bright pure green530nm
LB/SBSuper bright blue470nm
LY/SYSuper bright yellow593nm
SRSuper red655nm
WWhiteX: 0.285, Y: 0.275
[6]
Emitting
color
of
the
display
YG/
SYG
Super bright yellow green573nm
LE/SESuper bright orange-red632nm
LRSuper bright red650nm
LE1Super bright red-orange645nm
UEUltra-bright orange-red627nm
URUltra bright red660nm
GGreen face
[7]
REF
face
color
RRed face
BBlack face
WWhite face
RRed face
[8] Display
segment
color
GGreen face
WWhite face

Conclusion 

This blog post makes a quick introduction about OPTO PLUS LED model coding rules, The customer that know OPTO PLUS model coding rules would know the product feature. 

Leave a Reply

Your email address will not be published. Required fields are marked *